Adamson M15 - Manual (Page 13)

M15 User Manual Page 1 of 24
Rigging with the MASS™ System
1. Screw the polemounting piece horinzontally
to the multipurpose plate. (1/4’ 20 machine
screw, 1/2” long.
2. Fasten the plate to the M15 as on page 11.
. In the event that you have
the “flytrack” installed onto the
multipurpose plate and do not
want to uninstall it, you can screw
the pole mounting piece
verticallly. This will cover a part of
the protractor, and
therefore we suggest using
a horizontal pole mount
placement whenever possible.
Note- In this position the cabinet
is not gravity centered, therefore
ensure the tripod legs are fully
extended and reinforced as
required.
Section 6.