Vibiemme Lollo - Manual (Page 11)

11
4.3. Brewing espresso: electronic version doses programming
Each coffee dose’s quantity can be modified thanks to the volumetric control and can be memorized
through the following procedure:
1) Press the key, keep it pressed for more than 5 seconds until the LED is on.
2) Press within 5 seconds (programming time-out) any of the keys related to the four programmable
doses
; the LED of the pressed key remains on, as the one related to the
programming function.
3) When the desired coffee quantity is reached, please press any of the coffee keys
on the keyboard related to the group under programming to stop the dispensation. The new dose value
is memorized.
At the same time all LEDs related to doses switches ON and the programming LED starts blinking; it
is now possible to go on programming the other doses without repeating the entering procedure (see
point 1).
- Repeat point 2) and 3) to program all other coffee doses (if the programming time-out hasn’t elapsed)
- In case the time-out (5 seconds) intervenes on programming phase, please repeat points 1), 2) and 3)
IMPORTANT: the programming performed on the 1st group is ALWAYS automatically transferred
even on the other groups. Anyway this doesn’t affect the possibility of programming the other
groups independently from the first one through the procedure described in points 1), 2) and 3).