Transystem GM-2 - Manual (Page 4)

GM-2 Series
V0.5 4
4.
Installation
Step I ：Check your GM-2 package
The standard package of GM-2 contains:
GM-2 Receiver
CD ROM
Please contact local distributor immediately if any item is missing or damaged.
Step II ：Connect GM-2 to PC/Lap top or handheld device
For PS2 type: No USB Driver Installation is needed.
For USB type: please follow the instruction as below. Before the USB
connector plugs into your PC/Lap top, please have your USB Driver Installed.
Step III ：Check if the LED is on.
Once connect your GM-2 to PC/Lap top or handheld device, Orange LED will
start flashing once power is applied.
5.
How to configure your GM-2?
The GpsView program only supports the Microsoft Windows XP, Vista and Win 7 OS.
5.1. Driver Installation
Connect GM-2 to PC and then click “CP210xVCPInstaller.exe” to start the installation process. The device manager
will assign a COM port for GM-2 after USB driver has been successfully installed.