Transystem photoMate 887 - Manual (Page 8)

8
1.7 LED Display
887 photoMate has four LED lights, one is Bluetooth Status LED, the 2
nd
one is Battery Status LED, the 3
rd
one is GPS Status LED, the 4
nd
one is
Log LED. The status table of LED shows as follows:
Category SYMBOL COLOR STATUS Function
Always on: Bluetooth on, but not connected
to any Bluetooth devices yet
Slowly
blinking: Sleeping mode (1 time/ 5
seconds)
Quickly
blinking: Bluetooth is connected and ready
for data transmission (1 time / 2
seconds)
Bluetooth
Status LED Blue
Off In LOG mode
Red Blinking: The battery is too low
Green On: The battery is charging
Battery Status
LED
Green Blinking The battery is fully charged
Always on: Acquiring satellites, GPS
position not fixed GPS Status
LED Orange
Quickly
Blinking: GPS position is fixed,
Navigation (1 time / 1 second)
Blinking In LOG mode.
Always on: The memory has been full.
LOG / POI
Status LED Green
Quickly
blinking: LED blinks 3 times, Points of
Interest (POI) is recorded.