Chapter 3 how to configure your gps record, 1 driver installation, 2 gpsview software – Transystem 747ProS User Manual

Page 11

Chapter 3 How to configure your GPS Record?

The GpsView program only supports the Microsoft Windows based platform.

3.1 Driver Installation

Before the USB connector plugs in your PC/ Laptop, please have your USB Driver

Installation ready. (Install InstallDriver.exe driver for USB port from CD-ROM.)

3.2 GpsView software

Open GpsView software and select correct COM port and Baud Rate and then click “On”

button to establish the communication between 747ProS and PC. If the connection is

successful, the NMEA stream will keep showing.

Default baud rate of 747ProS is 115200bps

NMEA sentence

Satellite

reception

Satellite No.

Cold, warm and

hot start test

button