Transystem 860E User Manual
Page 2
e. Setup your 860E
Install the software utility and driver for 860E. (System requirement)
Minimum Configuration
Recommended Configuration
- Windows XP
- Pentium 3, 500Mhz
- 128M RAM
- 400MB disk space
- Network speed: 128Kbits/sec
- 3D-capable video card with 16Mbytes of VRAM
- 1024x768, "16-bit High Color" screen
- Windows XP, or Vista
- Pentium 4 2.4GHz+ or AMD 2400xp+
- 1G RAM
- 2 GB of free disk space
- Network speed: 768 Kbits/sec or better (DSL/Cable)
- 3D-capable video card with 32 MB of VRAM or greater
- 1280x1024, "32-bit True Color" screen
f. How to connect 860E to your PC
Step1.
Find the software in the CD come with the package.
Step2.
Double click on the phototagger in the software utility folder
and follow the process to finish the installation.
Step3.
User will be required to
input the product key of
phototagger at first time use.
Product key can be found on
the envelope of CD come
with the package.
** Note! Please keep the product key in a safe place. **
Step4.
Connect 860E to your computer with USB cable come with
package and turn on the power of the device.
Step5.
Open phototagger and click on the “config GPS” button
show in the below circled area to setup the device.
Step6.
Remove USB connection after finish the setup and switch on
the power again and then you can enjoy recording of your trip.
g. How to read data from the device.
Step1.
Connect 860E to your computer with USB cable come with
package and turn on the power of the device.
Step2.
Open phototagger and click on the “Read from device” button
show in the below circled area to start downloading data.
Step3.
[Note] To display track points on Google Earth, your PC must have Network to access the internet and Google Earth
application. Google Earth installation (Download from http://earth .google.com/)
[Notes and Warning] If you have recorded more than 125,000 waypoints in your 860E, it may take an entire resource of your
computer to show all the logged data in Google Earth. Therefore, with not enough RAM capacity the computer may hang up
(a system frozen).
For detail use of phototagger --- Please refer to Help > User Manual show in the below circled area.