Transystem mobileMate 886 - Manual (Page 11)

Ver 1.3 10
4. Connect to Serial Port Profile (SPP) Slave
-->
Tap and Hold 886 GPS: SPP
slave, Connect Done
5. Finish Bluetooth Manager Setup
Step 4 Load your GPS mapping or routing software
You should have mapping software on your PDA/ Smartphone/ laptop or
you need to install it before using the 886 for navigation.
Step 5 Start the application
Select the correct COM port & baud rate within the application.
[Note] The Bluetooth device in most of the applications has an
“auto-detect” feature so that you do not need to select the Baud Rate.