Delphi SKYFI2 DPSS-04-E-064 - Manual (Page 15)

14
Advanced Featur
es
Advanced Features
Listening to XM
Using Any FM Radio
SKYFi2 has a built-in wireless FM
modulator that transmits the XM
audio signal to any nearby FM radio.
You can use the wireless FM modulator
in a vehicle, in your home, in an
office, or even on a boat using the
appropriate kit.
1. Make sure your SKYFi2 is turned
off. Unplug any accessory from
SKYFi2’s audio jack.
2. Turn on an FM radio and place it
close to your SKYFi2.
3. Tune the FM radio to each of the
following FM frequencies:
88.1, 88.3, 88.5, 88.7, 88.9, 106.7,
106.9, 107.1, 107.3, 107.5, 107.7,
and 107.9.
4. Note the frequency that has no FM
station or the least amount of
interference.
5. Turn on your SKYFi2.
6. Press the “menu” button.
7. Use the scroll wheel to select
“FM Frequency.” Press the “XM”
button to confirm.
8. Use the scroll wheel to select the
frequency noted in step 4. Press
the “XM” button to confirm.
9. Press the “menu” button to return
to the main menu and then again
to return to the play screen.
10. You should now hear XM program-
ming over your FM radio. If the
sound is not clear or you hear
interference or static, try another
frequency by repeating the process
above.
Note: If you are not using the wireless FM
modulator, set the FM frequency to “FM Off”
for the best audio quality.