TabletKiosk eo a7330 Ultra-Mobile User Manual
Page 2

Congratulations on your purchase of an eo
™
a7330 Ultra-Mobile PC. This guide was designed
to help you get up and running with your new system as quickly and easily as possible.
For more information on setting up and using your eo a7330, please consult the digital PDF
User’s Guide located on your Windows desktop, or visit our website at
www.tabletkiosk.com
.
What’s in the Box
Your eo Ultra-Mobile PC should come securely packaged in its shipping container along with
the items listed below. Contact your dealer immediately if you find that anything is missing or
damaged. Note, however, that contents may have changed without notice.
1. AC Adapter and Power Cord
2. Microfiber Cleaning Cloth
3. Neoprene Slip Case
4. This Quick Start Guide (a high-res PDF of the User’s Guide is included on the desktop)
5. Applicable Operating System Getting Started Guide
1
6. System Restore Disc
2
7. Standard Lithium-Ion Battery Pack
8. Secondary Lithium Polymer Battery Pack (comes standard with a7330D only)
9. Stylus Pen
Setting Up Your eo Ultra-Mobile PC
Please read the following steps to help you begin using your new eo a7330 Ultra-Mobile PC.
Refer to the Getting Started chapter in the User’s Guide for more detailed information.
Step 1: Insert the Battery Pack(s)
Turn the eo Ultra-Mobile PC over and place it, screen down on a solid, clean, flat surface to
prevent damaging the touch screen. The included slip case works well for this.
Inserting the Main Lithium-Ion Battery Pack
Align the battery so that the power output port on the
bottom of the battery matches up with the power input
pins on the back of the eo a7330. Angle the battery
slightly down and place it in the battery slot so that
the battery’s small retaining tabs fit into the matching
grooves on the eo just beside the power input pins. Then
lay down the opposite side of the battery into the slot
until it “clicks” into place.
NOTE: Make sure to write down the Product Key located
on the Windows 7 COA sticker in the battery bay before
inserting the Main battery as you’ll need it to Activate
Windows 7 later in the set-up.
Inserting the Secondary Lithium-Polymer Battery Pack
Align the battery so that the power output port on the bottom of the battery matches up with
the power input pins on the back of the eo a7330. Angle the battery slightly down and place
1
There will not be a Getting Started Guide included if you ordered your Ultra-Mobile PC with openSUSE™
Linux or without an OS.
2
There will not be a System Restore Disc included if you ordered your Ultra-Mobile PC without an OS
option. Some units may include a restore image on the internal hard drive in addition to, or in lieu of, a
system restore disc.
!
@