beautypg.com

Care and maintenance, Deck removal – Dixon 13641-0802 User Manual

Page 35

background image

35

CARE AND MAINTENANCE

DECK REMOVAL:

1.

Move deck lift lever to lowest cut position.

2.

Rotate seat assembly forward.

3.

Pull idler to relieve belt tension. Remove belt.

4.

Remove cotter pin, washer and clevis pin from rear

deck brackets (2 places).

Note:

Raising the front of the deck slightly to sit on

blocks will take the pressure off clevis pins.

5.

Push deck forward to separate front deck brackets

from hanger rod. Deck will fall to the floor.

6.

Slide deck from underneath chassis. (Reverse proce-

dure to reinstall deck assembly.

NOTE: When deck is reinstalled on frame, check that belt is

correctly routed in the grooves of all pulleys and that

belt idler is applying tension to the back side of the belt.