Saturn ST-HC0306 - Manual (Page 2)

3
GB
HAIR CRIMPER
Dear Buyer!
We congratulate you on having
bought the device under trade
name “Saturn”. We are sure that
our devices will become faithful
and reliable assistance in your
housekeeping.
Avoid extreme temperature
changes. Rapid temperature
change (e.g. when the unit is
moved from freezing temperature
to a warm room) may cause
condensation inside the unit and a
malfunction when it is switched
on. In this case leave the unit at
room temperature for at least 1.5
hours before switching it on.
If the unit has been in transit,
leave it indoors for at least 1.5
hours before starting operation.
DESCRIPTION
1. Straightening plate
2. Body
3. Indicator light
4. On/Off switch
5. Handle
6. Cord swivel protection
7. Release plate button
8. Big crimping plate
9. Small crimping plate
IMPORTANT SAFEGUARDS
 Please, read this instruction
manual carefully before use and keep
it in a safe place for future reference.
 The hair crimper is for household
use only.
 Before the first connection of the
appliance check that voltage, indicated
on the rating label, corresponds the
mains voltage in your home.
 Always unplug the hair crimper
from the power supply when not in
use, attaching accessory parts and
before cleaning.
 To protect against the risk of
electric shock, do not immerse the
appliance in water or in any other
liquids.
 Do not take this appliance into a
bathroom or use near a water basin.
 Keep away from children.
 Do not leave the hair crimper
switched on, while not using.
 Do not use other attachments
than those supplied.
 Never carry or suspend the hair
crimper by the cord.
 Do not operate after malfunction
or damage to cord.
 To protect against the risk of
burn, do not touch the detachable
plates.
 Do not attempt to repair, adjust
or replace parts in the hair crimper.
Repair the malfunctioning appliance in
the nearest service center.
CAUTION:
 The appliance is hot when in use.
INSTRUCTION FOR USE
 Comb hair and fully unwind the
cord.
 Establish the plate on the
appliance and pull downwards it, until
it clicks into proper position.
 To remove the plate from the hair
crimper, press the release plate
button, then pull upwards to remove it
from the attachment point.
 Insert the plug into the power
supply.
 Set the On/Off switch to “ON”
position, thus the indicator light
should light up. Allow the appliance to
heat a few minutes.
 Divide your hair into locks, clamp
the lock between plates and fixing
such position during 1-2 minutes.
The set includes:
-
Straightening plate: allows to
straighten curly hair;
-
Crimping plates: wavy style.
 Do not comb hair right after a
curling. Give it time to cool down.
 When finished, set the On/Off
switch to “Off” position and unplug the
appliance from power supply.
CLEANING AND CARE
 Switch off the appliance, unplug
from the power supply.
 Wipe over the body using a soft
damp cloth.
 Wash the detachable plates in
warm soapy water.