Saturn ST-FP0061 - Manual (Page 2)

3
GB
CHOPPER
Dear Buyer!
We congratulate you on having
bought the device under trade name
“Saturn”. We are sure that our devic-
es will become faithful and reliable
assistance in your housekeeping.
Avoid extreme temperature changes.
Rapid temperature change (e.g. when
the unit is moved from freezing tem-
perature to a warm room) may cause
condensation inside the unit and a
malfunction when it is switched on.
In this case leave the unit at room
temperature for at least 1.5 hours
before switching it on.If the unit has
been in transit, leave it indoors for at
least 1.5 hours before starting opera-
tion.
Read all instructions carefully before
using the appliance
INSTRUCTION FOR SUPPER CHOPPER
Safety
l The blades are sharp, handle with
care. Hold the knife blade at the top away
from the cutting edge, both when handing
and cleaning.
l Do not plug the appliance into the
power supply unit it is fully assembled and
always unplug before die-assembling the
appliances or handling the knife blade.
l Remove the knife blade before empty-
ing the bowl.
l Never use and unauthorized attach-
ment.
l Don’t let children play with this appli-
ance.
l Never use a damaged appliance. Get it
checked or repaired: see “service”.
l Never let the power unit, cord or plug
get wet.
l Don’t let excess cord hang over the
edge of a table or workshop or touch hot
surface.
l Never misuse your food chopper and
lonely use it for its intended domestic use.
l Do not use if there is any visible dam-
age to the appliance.
l The appliance is not intended for, use
by young children or infirm persons without
supervision.
l Never leave the appliance on unat-
tended.
Description (as shown the Figure)
1. Switch
2. Body
3. Cover
4. Cup
5. Knife
6. Non-slip mat
Important
l Do not run the super chopper continu-
ously for longer than 20 seconds. Leave to
cool for 1 minute in between each 15 se-
cond operation.
l Do not operate the super chopper if
the bowl is empty.
l Never operate the super chopper with
the bowl filled with liquid.
Before plugging in
l Make sure your electricity supply is the
same ad the one shown on the underside of
the power unit.
Before using for the first time
l Remove all packaging including the
plastic blade covers from the knife blade.
These covers should be discarded as they
are to protect the blade during manufacture
and transit only.
l Wash the parts: see “cleaning”.
To use the food chopper
1. Place the non slip mat onto the
work-surface, rib side down.
2. Position the bowl onto the middle
of the non slip mat.
3. Fit the knife blade over the pin in
the bowl.
4. Add your food, see processing
guide.
5. Cut large pieced of food into 1-2
cm (1/2-3/4 in pieces).
6. Don’t chop hard foods such as
coffee beans, ice cubes, spices or chocolate-
you’ll damage the blade.
7. Fit the splashguard. Make sure
the slots in the splashguard fit over the
handles in the rim of the bowl.
8. The super chopper will not oper-
ate unless the splashguard in fitted.
9. Fit the power unit.
10. The power unit will only fit cor-
rectly in two positions.
11. Plug in. press down on the power
unit for short lengths of time to produce a
pulsing action-this will avoid over pro-
cessing the ingredients.
12. If the machine labors, remove
some of the mixture and continue pro-
cessing in several batches.
13. Stop the machine and scrape
down if necessary.
14. Do not run the super chopper
continuously for longer than 10 seconds.
Leave to cool for 1 minute in between each
10 seconds operation.
15. After use. Unplug and dismantle.
Cleaning
l Always switch off and unplug
before cleaning.
l Handle the cutting blade with
care they are extremely sharp.
2