Saturn ST-EK0005 - Manual (Page 3)

4
its service agent or similarly qualified
persons in order to avoid a hazard.
- Avoid touching hot kettle surfaces-
use the handle and knobs.
- To avoid possible steam damage,
turn the spout away from the walls or
cabinets when operating the kettle.
- If operated on wood furniture, use
a protective pad to prevent damaging
delicate finishes.
- To avoid scalding, always ensure
the lid is correctly positioned before
operating.
- Scalding may occur if the lid is
removed while heating.
- Remove the lid carefully when the
kettle is hot .Do not remove the lid
while the water is boiling.
- Extreme caution must be used
when moving the kettle containing hot
water.
- Never lift the kettle by its lid.
Always use the body handle.
- Do not switch your kettle on if it is
empty; ensure that the kettle is
switched off before removing it from its
stand.
- To protect from electrical hazard,
do not immerse this kettle, power base
or cord in any liquid.
- Use the kettle only with the
provided stand. Do not use the base
unit for other purposes.
- To protect against fire, do not
operate it in the presence of explosive
and/or flammable fumes.
- A kettle should not be left
connected to a wall socket when the
room temperature is likely to fall to
outdoor winter temperatures. Control
thermostat may reset the contact group.
- Do not use the kettle for any
purpose for any other uses than those
specified in this instruction manual.
- This appliance is not intended for
use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
- Children should be supervised to
ensure that they do not play with the
appliance.
- This appliance is intended to be
used in household and similar
applications such as: staff kitchen areas
in shops;
- offices and other working
environments;
- farm houses; by clients in hotels,
motels and other residential type
environments;
- bed and breakfast type
environments.
5
The appliance must not be immersed
into water.
SAVE THESE INSTRUCTIONS!
PRODUCT DESCRIPTION:
1. Lid opener
2. Lid
3. Handle
4. Water window
5. Switch
6. Power cord
7. Kettle body
8. Kettle bottom
9. Base
INSTRUCTIONS FOR USE:
- Before the first use, fill the kettle
with clean water to maximum capacity
and boil. Discard the water and repeat.
- The kettle should always be
unplugged when filling or adding water.
- Fill the kettle with water to the
desired level. Do not overfill otherwise
there will be a risk of spillage or
spitting. The water window with clear
water level indicator will assist you to
measure correct amount. You can fill the
kettle via the spout or after opening the
lid. Do not forget to close the lid after
filling otherwise the kettle will not
automatically switch off after use.
- An automatic safety cut-out has
been fitted for protection against
overheating. It will operate if the kettle
is switched on when containing
insufficient water.
- If the automatic safety cut-out has
operated, switch the kettle off,
disconnect from the power outlet and
allow the kettle to cool down for 5-
10minutes.Then refill with water and
switch on-the kettle will then boil and
cut off as in normal operation.
- The kettle may be switched off at
any time by either pushing the switch of
the kettle to the “up” position or by
switching the power off at the power
outlet.
- To pour water, lift the kettle from
the power base and pour.
CORDLESS KETTLE:
- Place the power base on a dry, flat
surface.
- Place the kettle on the power base.
- Plug the cord into an earthed
power socket and switch on by