Specifications, pcd 3 – Proceed PCD User Manual
Page 23
23
Specifications, PCD 3
■ Frequency response:
10 Hz – 20 kHz +0dB, -0.2dB
■ Total harmonic distortion (THD):
0.004% @ 1 kHz, 0dB
■ Dynamic range:
104dB (or better)
■ Signal-to-noise ratio:
107dB
■ Channel separation:
120dB
■ Intermodulation distortion (SMPTE IMD):
0.008%
■ Digital-to-analog conversion:
Two precision 20-bit DACs
■ Filtering:
8x oversampling digital filter
Analog filter, linear phase to 40 kHz
■ Low-level linearity:
Deviation unmeasurable to below -70dB,
approximately +1.0dB below -90dB
(undithered, ref 0dB @ 1kHz)
■ Output impedance:
<1
Ω
■ Mains voltage:
120 V U.S. service
■ Mains frequency:
50/60 Hz
■ Power consumption:
25W @ 120V, 60 Hz
■ Shipping weight:
27 lbs/12.24 kg
■ Overall dimensions
■ Width:
8.4 in/214 mm
■ Height:
8.9 in/227 mm
■ Depth:
13.25 in/337 mm
Madrigal Audio Laboratories, Inc., reserves the right to change this
product’s features and specifications without notice.
Pin 1: Chassis ground
Pin 2: Signal + (non-inverted)
Pin 3: Signal – (inverted)
Pin assignments, male XLR
balanced analog output
2
1
3