Paxton Superchargers Mustang Renegade Class - Manual (Page 9)

P/N: 4809622a
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
07SEP06 v2.0 MusRenegade(4809622a v2.0)
3-1
3.1 ALTERNATOR RELOCATION
Section 3
ALTERNATOR MOUNTING BRACKET INSTALLATION
*** NOTE ***
The alternator Relocation kit was designed for the
factory '86-'93 style 70 AMP alternator with the stock
pulley. If you are running an underdrive pulley you
will need to acquire a longer belt. This bracket will
not accommodate the larger 140 AMP alternator. For
most racing applications, 70 AMPS is more than
enough to power the multiple fuel pumps, computers,
and ignition systems.
A. Install the alternator Relocation Bracket (See
Fig. 3-a, Appendix “E”), including the water
pump pulley, to the engine block at the points
indicated. (See Fig. 3-b.)
B. Install the alternator.
WATER PUMP
PULLEY LOCATION
Fig. 3-a
Fig. 3-b
ALTERNATOR BRACKET
LOCATIONS