Pir-88m, Specifications – Oxmoor PIR-88M User Manual
Page 2
Oxmoor Corporation, LLC, 309 Cahaba Valley Parkway, Birmingham, AL 35124 USA Toll Free: 1-800-262-6898
Phone: 205-982-8200 Fax: 205-982-8250 E-mail: [email protected] Internet: www.oxmoor.com
PIR-88M
™
SPECIFICATIONS
Specifications subject to change without notice.
Rev. 7/01
AUDIO INPUTS
AUDIO INPUTS
AUDIO INPUTS
AUDIO INPUTS
AUDIO INPUTS
Type .............................................. Electronically Balanced (RF Suppressed)
Connectors .................................... Screw Terminal Blocks with Mating Connector
Input Impedance ........................... 80 K Ohms
Input Sensitivity ............................. Nominal +4 dBu, Maximum +24 dBu
Trim Pot Range ..............................
±
15 dB
MODULATOR
MODULATOR
MODULATOR
MODULATOR
MODULATOR
Input ............................................. Limiter Protected
Frequency ..................................... 95 kHz or 250 kHz Selectable
Preemphasis ................................. 50
µ
sec.
Peak Deviation ...............................
±
50 kHz
Crosstalk Attenuation ..................... 50 dB @ 250 kHz
RF OUTPUTS
RF OUTPUTS
RF OUTPUTS
RF OUTPUTS
RF OUTPUTS
Connectors .................................... BNC
Output Level .................................. 750 mV rms
CONTROL PORT
CONTROL PORT
CONTROL PORT
CONTROL PORT
CONTROL PORT
Connector ..................................... 37-pin D-sub, Female
Input Type ..................................... Active Low, Internally Pulled Up
Logic Action "Selectable" ............... Momentary or Maintained Closure to Common
Logic Levels ................................... Low < .8 Volts, High > 2.4 Volts
Maximum Sink Current .................. 1 mA
Maximum Cable Length ................. 600 m (2000 ft), #22 AWG
Switching Time .............................. 50 ms
Power Output ................................ +15 VDC
±
0.1 V, 50 mA
COMMUNICATION
COMMUNICATION
COMMUNICATION
COMMUNICATION
COMMUNICATION
Protocol ......................................... PA-422
Input Connector ............................. 9-pin D-sub, Mail
Output Connector .......................... 9-pin D-sub, Female
POWER
POWER
POWER
POWER
POWER
Connector ..................................... Cage Clamp Terminal Blocks
AC Adapter Provided
Voltage ..........................................
±
15 VDC
Current .......................................... 1 Amp
MECHANICAL
MECHANICAL
MECHANICAL
MECHANICAL
MECHANICAL
Overall Dimensions ........................ 44mm H x 482mm W x 183mm D
(1.72" H x 19" W x 10" D)
Finish ............................................ Textured Black Paint
Weight ........................................... Shipping: 3.8 Kg (8.5 lb.)
Net: 3.1 Kg (6.9 lb.)