Oxmoor MDA-16 - Manual (Page 2)

Oxmoor Corporation, LLC, 309 Cahaba Valley Parkway, Birmingham, AL 35124 USA Toll Free: 1-800-262-6898
Phone: 205-982-8200 Fax: 205-982-8250 E-mail: [email protected] Internet: www.oxmoor.com
MDA-26 ™ /MDA-16 ™ SPECIFICATIONS
Specifications subject to change without notice. *SMPTE Method; 60 Hz +7 kHz mixed 4:1.
7/23/01 Rev. 2.2
FREQUENCY RESPONSE FREQUENCY RESPONSE FREQUENCY RESPONSE FREQUENCY RESPONSE FREQUENCY RESPONSE 20 Hz to 20 kHz ............................................ +0, – 0.3 dB
- 3 dB Points, Ref.1 kHz ................................. 4 Hz to 60 kHz (+4 dBm Output)
HUM AND NOISE HUM AND NOISE HUM AND NOISE HUM AND NOISE HUM AND NOISE Ref. +4 dBm Output @ Unity Gain .................. - 94 dB (20 Hz to 20 kHz BW, Unweighted)
DISTORTION DISTORTION DISTORTION DISTORTION DISTORTION Ref. +4 dBm Output @ Unity Gain
THD + NOISE ................................................ 0.0016% (20 Hz to 20 kHz BW)
SMPTE IMD .................................................. 0.0021% (60 Hz + 7 kHz, Mixed 4:1)
Transient Intermodulation .............................. 0.0031% (3.15kHz SQ + 15kHz Probe, 30kHz BW)
CROSSTALK CROSSTALK CROSSTALK CROSSTALK CROSSTALK Channel to Channel (MDA-26) - 80 dB (20 Hz to 20 kHz, Input Terminated w/600
Ohms, Adjacent Channel Driven to +4 dBm)
AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT Type .............................................................. Electronically Balanced (RF Suppressed)
Connector ...................................................... Female XLR
Pin Out .......................................................... Pin 1 Shield (Chassis), Pin 2 +, Pin 3 –
Input Impedance ............................................ 80 k Ohms
Nominal Input Level ....................................... +4 dBu
Maximum Input Level ..................................... +24 dBu
Trim Pot Gain Range ......................................
±
15 dB (Ref. 0 dBu Output)
AUDIO OUTPUT AUDIO OUTPUT AUDIO OUTPUT AUDIO OUTPUT AUDIO OUTPUT Type .............................................................. Electronically Balanced
(Unbalancing Jumpers Provided)
Connector ...................................................... Male XLR
Pin Out .......................................................... Pin 1 Shield (Chassis), Pin 2 +, Pin 3 –
Source Impedance ......................................... 150 Ohms (75 Ohms/Side)
Recommended Load Impedance .................... 600 Ohms or Greater
Nominal Output Level .................................... +4 dBu (+4 dBu Input)
Maximum Output Level (Ref. 1 kHz @ Rated THD)
Terminated w/600 Ohms ........................... +24 dBm (All Outputs Driven Simultaneously)
Unterminated ............................................. +26 dBu
Trim Pot Gain Range ......................................
±
15 dB (Ref. 0 dBu Output)
SAFETY LISTING SAFETY LISTING SAFETY LISTING SAFETY LISTING SAFETY LISTING UL ................................................................. 1419
MAINS POWER MAINS POWER MAINS POWER MAINS POWER MAINS POWER Power Requirements ...................................... 100 to 125 VAC or 200 to 230 VAC
50/60 Hz; 13 Watts Maximum
MECHANICAL MECHANICAL MECHANICAL MECHANICAL MECHANICAL Overall Dimensions ........................................ 44H x 482W x 183D mm
(1.72" H x 19" W x 7.18" D)
Finish ............................................................ Textured Black Paint
Weight ........................................................... Shipping: 3.8 Kg (8.5 lb.) Net: 3.1 Kg (6.9 lb.)