OT Systems FT040AB - Manual (Page 13)

FT040AF Series Installation & Operation Manual
www.ot-systems.com 13
(6) Specifications
MODELS*
PARAMETERS
FT040AF-SSTR(RT)SA
FT040AF-SSTR(RT)
(Single-Mode)
FT040AF-SSTR(RT)LSA
FT040AF-SSTR(RT)L
(Single-Mode)
FT040AF-SMTR(RT)SA
FT040AF-SMTR(RT)
(Multi-Mode)
OPTICAL
No. of Fiber / Connector 1 / ST (or FC) 1 / ST (or FC) 1 / ST (or FC)
Wavelength 1310/1550 nm 1550/1310 nm 1310/1550 nm
Optical Power Budget 17 dB 24 dB 23 dB
Max Distance 40 km 60 km 4 km
AUDIO
Channel / Connector 4 / 5-pin Screw Terminal
Direction Uni-directional (Forward)
Input Level / Impedance 0dBm(normal), 10K ohms, Balanced or Unbalanced
Audio bandwidth 20Hz~20KHz
Output Level +4dBm
SNR >66dB
POWER
Power consumption 12VDC @ 4.8W
Power Supply Standalone unit: FT/PA12V DC Adaptor
Card module: Powered by FT-C18 chassis
Connector (Standalone unit) 2-pin Screw Terminal
PHYSICAL
Weight (Kg) Standalone unit: 0.62 Card module: 0.22
Dimensions (W x H x D) (mm) Standalone unit: 156 x 30.5 x 223 (MAX)
Card module: 148 x 20.4 x 213 (MAX)
ENVIRONMENTAL
Operating Temperature -40
o
C ~ +75
o
C
Storage Temperature -40
o
C ~ +85
o
C
Relative Humidity 0 ~ 95% non-condensing
MTBF >100’000 Hours
*
If the optical connector is FC type, the suffix in the model number will be “-FXX”. Eg. FT040AF-FSTR