OT Systems FT110AB - Manual (Page 14)

FT110AB Series Installation & Operation Manual
www.ot-systems.com 14
(6) Specifications
MODELS*
PARAMETERS
FT110AB-SST(R)SA
FT110AB-SST(R)
(Single-Mode)
FT110AB-SST(R)LSA
FT110AB-SST(R)L
(Single-Mode)
FT110AB-SMT(R)SA
FT110AB-SMT(R)
(Multi-Mode)
OPTICAL
No. of Fiber / Connector 1 / ST (or FC) 1 / ST (or FC) 1 / ST (or FC)
Wavelength 1310/1550 nm 1550/1310 nm 1310/1550 nm
Optical Power Budget 17 dB 24 dB 23 dB
Max Distance 40 km 60 km 4 km
ELECTRICAL VIDEO
Channel / Connector 1 / BNC
System PAL, NTSC, SECAM
Bandwidth 6.5 MHz
Input/Output Impedance 75 Ohm
Input/Output Level 1.0 Vp-p typical
Differential Gain < 1% typical
Differential Phase < 1
o
typical
SNR >65dB
AUDIO
Channel / Connector 1 / 7-pin Screw Terminal
Direction Bi-directional (Duplex)
Input Level / Impedance 0dBm(normal), 10K ohms, Balanced or Unbalanced
Audio bandwidth 20Hz~20KHz
Output Level 4dBm@1KHz
SNR >66dB
POWER
Power consumption 12VDC @ 4.8W
Power Supply Standalone Unit: FT/PA12V DC Adaptor
Card module: Powered by FT-C18 chassis
Connector (Standalone unit) 2-pin Screw Terminal
PHYSICAL
Weight Standalone unit: 0.6 Card module: 0.2
Dimensions (W x H x D) Standalone unit: 156 x 30.5 x 223 (MAX)
Card module: 148 x 20.4 x 213 (MAX)
ENVIRONMENTAL
Operating Temperature -40
o
C ~ +75
o
C
Storage Temperature -40
o
C ~ +85
o
C