OT Systems FT800 - Manual (Page 10)

FT800 Series Installation & Operation Manual
www.ot-systems.com 10
4.2 Ground connection
For enhanced safety to reduce the risks of electrical shock and physical damage, caused by
lightning and other power surges, as well as a connection to the surge suppresion devices in the
product, a screw terminal is provided on the Standalone cabinets (Fig. 4.4). It is highly
recommended that the Standalone unit have good ground connections to the buildings ground in
accordance with the local codes.
Fig. 4.4 Standalone unit earth ground terminal location
(5) Operational Guides
5.1 FT800 Series Transmitter
LED Indicators
Indicator Color Description
PWR Red Lit when power is supplied to the Transmitter.
OL Yellow Lit when optical signal from receiver to transmitter is active.*
VIDEO IN /
VIN
V1 Green
Lit when video signals are fed into the VIDEO IN connectors.
V2 Green
V3 Green
V4 Green
V5 Green
V6 Green
V7 Green
V8 Green
* For products with uni-directional signal transmission, the OL LED on the Tx is not lit because optical signal from the Rx to the Tx is
always inactive.