beautypg.com

Dacor Preference User Manual

Page 5

background image

33

Oven Modes

All oven modes are described below:

1. STANDARD BAKE – In Standard

Bake mode, the bottom heat element

provides conventional baking heat.

Temperatures may be set from 135˚

to 555˚F in 5˚F increments. Use

Standard Bake for single rack baking

and roasting.

2. STANDARD BROIL – The Infrared

Ceramic Gas Broiler supplies the

heat in Broil mode. The high wattage,

top heating element supplies the

heat in Broil mode in the RSE30

model only. The broil temperature

is adjustable from 135˚F, to the “HI”

setting (equivalent to 555˚F) for

greater cooking flexibility.

Broiling is

performed with the door closed.

3. CONVECTION BROIL (RSE30

model only) – The high wattage, top

heating element supplies the heat

in Broil mode in combination with

the convection fan for better heat

distribution. The broil temperature

is adjustable from 135˚F to the “HI”

setting (equivalent to 555˚F) for

greater cooking flexibility.

Broiling is

performed with the door closed.

4. PURE CONVECTION™ – In Pure

Convection™ mode a third heating

element, encircling the convection

fan located in the rear of the oven

chamber, acts as the heat source. The

convection fan draws air from the oven

chamber, then forces it across the

hot convection heating element. The

heated air is directed back into the

oven chamber through the convection

baffle. The baffle distributes the

heated air evenly to ensure uniform

results. Temperatures may be set

from 135˚ to 555˚F in 5˚F increments.

Use this mode for single rack baking,

multiple rack baking, roasting, and

preparation of complete meals.

5. CONVECTION BAKE – In this

combination convection-radiant mode,

the lower element provides the heat.

As in Pure Convection™ mode, the

convection fan and baffle combine to

circulate heated air evenly throughout

the oven chamber. Temperatures may

be set from 135˚F to 555˚F in 5˚F

increments. Use this mode for single

rack baking, multiple rack baking and

roasting.

6. SELF-CLEAN – In the pyrolytic

Self-Clean mode, the oven reaches

extreme high temperatures, thereby

burning off oven soil automatically.

The Self-Clean time is adjustable up

to four hours so that varying degrees

of oven soil can be successfully

removed. Also, the Self-Clean cycle

can be delayed to start at a later time

if desired.

Three chrome-plated oven racks are provided.

Always remember to position the racks prior to

heating the oven. Also, remove the oven racks

prior to self-cleaning to prevent permanent

discoloration of the racks.

The porcelain rack supports provide five (5)

heights for positioning of the oven racks.

To install a rack, align the left and right edges of

the rack with the horizontal guide rails of the rack

supports, then slide the rack into the oven.

Oven Racks & Supports

6
5
4
3
2
1

Oven Rack Positions

(RSE Shown)

Oven Mode Selection

Follow these steps to operate the oven

modes:

1. Position oven rack(s) at the proper

height(s).

2. Press the touch pad for the modes of

your choice. The oven will beep once,

the selected cooking mode will flash, and

“– – –” will be displayed.

3. Press either the “+” or “–” pad. The default

temperature will be displayed.

4. To adjust the default temperature for

baking, press and hold the “TIME•TEMP”

pad. (Press “+” key to increase the

temperature setting, “–” to decrease.)

“PRE” and “ON” will appear in the

clock display, and the oven will begin

to heat. If in a convection mode, the

convection fan will turn on. Also, the

clock display will change from the desired

cooking temperature to the actual oven

temperature, starting with 135˚F. The

temperature display will increase in 5˚F

increments until the desired temperature is

reached.

NOTE:

Do not place food inside the oven until the

Preheat cycle is complete.

When the desired temperature is attained, the

Preheat cycle is complete. The clock will beep

once and “PRE” and “ON” will disappear from

the display. (From this time forward, the “ON”

display will cycle on and off with the heating

elements.)

5. Carefully place the food onto the desired

rack(s) within the preheated oven.

6. It is recommended that a Minute Timer be

set to time the cooking process.

7. When the time expires and/or the

food is done cooking, press the

“CANCEL•SECURE” pad to turn off the

oven.

The oven features an automatic Preheat cycle

that rapidly brings the oven chamber up to

temperature. Simply by choosing a cooking

mode and setting a temperature, the oven will

automatically perform the Preheat function. The

Preheat cycle operates in Standard Bake, Pure

Convection™ and Convection Bake modes.

There is no Preheat cycle for the Broil or

Convection Broil modes.

NOTE:

Allowing the oven to completely pre-heat

prior to placing food in the oven will avoid

excessive browning of the food. After the

oven signals that the pre-heat is complete,

allow 3-5 more minutes for the heat patterns

to normalize in the oven and then place your

food inside.

Preheating the Oven

The clock features two timers that may be used

for time cooking or other processes up to 11

hours, 50 minutes in length.

To use the Minute Timer function, follow

these steps:

1. Press the touch pad labeled “TIMER 1”, or

“TIMER 2”. The clock will display “00:00”,

and “TIMER 1”, or

“TIMER 2” will flash.

2. Press the “+” pad until the desired time is

displayed on the clock.

3. After “TIMER 1” has expired, the clock

will sound off with one second beeps and

“TIMER 1” will appear in the display. After

the “TIMER 2” minute timer has expired,

the clock will sound alternating one and

two second beeps and “TIMER 2” will

appear in the display. The beeper can be

silenced by pressing the “TIMER” touch

pad while the beeper is sounding.

IMPORTANT:

Cancellation of the Minute Timer does not

turn off the oven if it is operating. You must

manually shut the oven off by pressing the

“CANCEL•SECURE” touch pad.

NOTES:

1. To view the current time of day rather

than the remaining time on the Minute

Timer, just press the “CLOCK” touch

pad. To change back to a Minute Timer

display, press the “TIMER 1” or “TIMER

2” touch pad.

2. To cancel the Minute Timer while in

progress, press the “TIMER 1 or 2”

touch pad two times. The clock display

will return to the time of day.

3. The Minute Timers may be used at the

same time as Delay Timed Cooking or

Self-Clean.

4. The Minute Timers will beep for 2

minutes (if not cancelled) before

automatically shutting off.

5. Pressing the “CANCEL•SECURE”

pad when the beeper is sounding will

cancel both the beeper and the cooking

function.

Minute Times

This manual is related to the following products: