nMediaPC HTPC 2800B - Manual (Page 5)

5
Step 4: Connect Cables
Following your motherboard & PSU user guide to connect cables
Connect USB 3.0 cable to the onboard USB 3.0 port
 Onboard USB 3.0 port is required)
Connect USB 2.0 port
to the onboard USB 2.0
port
Check your board to see if it has HD onboard port that supports
HD audio
 If yes, plug the HD connector to your HD onboard audio port
 If no, plug it to your AC 97 chipset onboard audio port using
the Y tale connector
 Connect Power Switch connector to your onboard port
 Connect Reset Switch connector to your onboard port
 Connect HDD Power Switch connector to your onboard port
Organize the cables with provided tied cables.
See picture for reference.