Amt configuration, Usb configuration – NEXCOM NISE 4000P4E User Manual

Page 116

101

NISE 4000P4E User Manual

Chapter 4: BIOS Setup

AMT Configuration

This section is used to configure Active Management Technology (AMT)
options.

Advanced

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable/Disable Intel (R)
Active Management Technology

BIOS Extension.
Note : iAMT H/W is always

enabled.
This option just controls the
BIOS extension execution.
If enabled, this requires
additional firmware in the SPI

device

Intel AMT

BIOS Hotkey Pressed

MEBx Selection Screen

[Enabled]

[Disabled]

Intel

AMT

Enables or disables Intel

Active Management Technology.

BIOS Hotkey Pressed
Enables or disables BIOS hotkey pressed.

MEBx Selection Screen
Enables or disables MEBx selection screen.

Advanced

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enables Legacy USB support.
AUTO option disables legacy

support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.

USB Configuration

USB Devices:

2 Drives, 1 Mouse, 2 Hubs

Legacy USB Support

USB3.0 Support

Mass Storage Devices:

Hitachi HTE543232A7A384 3.00

ASMT 2105 0

[Enabled]

[Auto]

Legacy USB Support

Enable Enables Legacy USB.

Auto

Disables support for Legacy when no USB devices are connected.

Disable Keeps USB devices available only for EFI applications.

USB3.0 Support

Enables or disables USB 3.0 controller support.

Mass Storage Devices

Mass Storage device emulation type. “Auto” enumrates devices according

to their media format. Optical drives are emulted as ‘CDROM’ , drives

with no media will be emulated according to a drive type.

USB Configuration

This section is used to configure the USB.