Installing a compactflash card – NEXCOM NISE 3640M User Manual

Page 73

NISE 3640M Series User Manual

Chapter 3: System Setup

Installing a CompactFlash Card

1. The CompactFlash socket is located at the front side of the chassis.

CompactFlash

2. Remove the mounting screws and cover of the CompactFlash socket.

3. Insert the CFast
4. Fasten the cover after installation.

Mounting screw

Power ON Sequence on NISE 3640M

Power OFF Sequence on NISE 3640M

1. Connect Power Supply SINPRO HPU101-108 24V into AC Power Source.

The AC Power Source needs to comply with following requirement:

▪ 100-240V~47-63Hz, 1.2-0.5A

2. Connect Power Supply SINPRO HPU101-108 24V into NISE 3640M DC IN

Mini-DIN Connector at rear panel.

3. Push the Power button on NISE 3640M.

1. Shut down the system by OS or by pushing the power button.

2. Disconnect the power cord from the AC inlet.

This manual is related to the following products: