beautypg.com

6 changing the quantity of coffee in the cup, 7 regulating the coffee mill – DeLonghi ESAM4400 User Manual

Page 13

background image

12

NOTE 8:

While the appliance is delivering coffee, never remove the water tank. If it is removed, the

appliance will not be able to make the coffee.
To reset the appliance, turn the steam knob counterclockwise as far as it will go and run off water from the
cappuccino frother for a few seconds.

When using the appliance for the first time, 4-5 cups of coffee need to be made before the applian-
ce starts to give satisfying results.

If the appliance malfunctions,

do not contact the service center right away.

The problem can almost always be resolved by following the instructions indicated in sections 14 and 15.
If this is not the case, or for further explanations, contact customer service by calling the number listed in the
warranty or visit www.delonghi.com for a list of service centers near you. (U.S. and Canada)

6 CHANGING THE QUANTITY OF COFFEE IN THE CUP

The appliance is factory preset to automatically deliver the following quantities of coffee:
-

1 shot espresso (when the button is pressed);

- 2 shots espresso (when the

button is pressed);

- long coffee (when the button is pressed);
To change these quantities, proceed as follows:
- press the button corresponding to the quantity you want to change ( , or

) for at least

8 seconds until the message "PROGRAM QUANTITY" is displayed;

- when the coffee in the cup reaches the required level, press the same button again to memorize the new

amount.

7 REGULATING THE COFFEE MILL

After making the first coffees, if you find that coffee delivery is either too fast or too slow (in drips), the grin-
ding coarseness regulator can be adjusted (fig. 15).
Turning it 1 click (1 number) clockwise speeds up coffee delivery (without drips).
Turning it 1 click counterclockwise slows down delivery giving a creamier appearance to the coffee.
These adjustments will only be evident after at least 2 cups of coffee have been brewed.
The grinding coarseness regulator must only be turned when the coffee mill is on.

Turn counterclockwise to obtain finer ground coffee, slower deli-
very and a creamier appearance.

Turn clockwise for coarser ground coffee and faster delivery
(not a drop at a time).

(Coffee has been used to factory test the appliance and it is therefore completely normal for there to be tra-
ces of coffee in the mill. This appliance is however guaranteed to be new).