NEXCOM NEX 613 - Manual (Page 39)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 25 NEX 613 User Manual
Chapter 3: BIOS Setup
ACPI Settings
This section is used to configure ACPI settings.
Advanced
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Select disable for ACPI
suspend type S1. It is
recommended to select auto for
ACPI S3 power saving.
Suspend to RAM
Check Ready Bit
ACPI HPET Table
PS/2 Keyboard Power On
PCI Devices Power On
Wake From Onboard LAN 2
RTC Alarm Power On
USB Keyboard/Remote Power On
USB Mouse Power On
[Auto]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[By OS]
[Disabled]
[Disabled]
Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto
for ACPI S3 power saving.
Check Ready Bit
Enables or disables Check Ready Bit.
ACPI HPET Table
Enables or disables ACPI HPET Table.
COM1 to COM6 Configuration
Configures the parameters of COM1 to COM6.
WDT Timeout Reset
Enables or disables the Watchdog Timer timeout to reset the system.
Advanced
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Set Parameters of COM1 Super IO Configuration
COM1 Configuration
COM2 Configuration
COM3 Configuration
COM4 Configuration
COM5 Configuration
COM6 Configuration
WDT Timeout Reset [Disabled]
Super IO Configuration
This section is used to configure the serial ports.





