NEXCOM NEX 609 - Manual (Page 58)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 44 NEX 609 User Manual
Chapter 3: BIOS Setup
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or
select SG for switchable GFx.
Internal Graphics
Keep IGD enabled based on the setup options. The options are Auto,
Disabled and Enabled.
DVMT Total Gfx Mem
Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics
Device. The options are 128M, 256M and MAX.
System Agent (SA) Configuration
This section is used to configure the System Agent (SA) configuration.
Chipset
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Check to enable VT-d function
on MCH. VT-d
► Graphics Configuration
► NB PCIe Configuration
VT-d
Enables or disables VT-d function on MCH.
Graphics Configuration
Configures the graphic chip settings.
NB PCIe Configuration
Configures the NB PCI Express settings.
Graphics Configuration
This section is used to configure the Intel ® IGFX configuration.
Chipset
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select which of IGFX/PEG/
PCI Graphics device should be
Primary Display Or select SG for
Switchable Gfx.
Graphics Configuration
Primary Display
Internal Graphics
DVMT Total Gfx Mem
LCD Control
[Auto]
[Auto]
[256M]
►