Monroe Electronics R197AV - Manual (Page 24)

26. In the Forwarding Audio Output Devices box click on Aux1 Audio Output.
27. Click Submit Selection Settings button at the bottom of the table (See Figure )
28. As previously mentioned, each of the R197A program switches is tied to a Net GPIO relay
control. Setting NET GPIO Output Relay 1 will close the Channel 1 AES switch, NET GPIO
Output Relay 2 will close Channel 2 AES switch, etc., routing and converting the Master input
to the output of the closed channel(s).
29. Repeat Steps 23-26 for each of the configured stations.
Figure Submit selections after assigning Net GPO port for the station.
24