Knox Video VS-200 - Manual (Page 24)

K NOX V IDEO VS-200 O PERATION M ANUAL
19
6 AUDIO / VIDEO INPUTS AND OUTPUTS
The VS-200 has a number of different inputs and outputs.
6.1 Computer & Video inputs
The PC/HD input can accept:
Analog RGBHV
RGsB (sync on green)
RGBS (separate sync at TTL levels)
YUV/YPbPr (including tri-level)
In most cases, the particular input being used will be auto-detected. See ‘Adjust
sources’ for more information on manually selecting an input type. The PC/HD input
is there just to loop the PC image through to the PC monitor in ‘bypass’ mode, or to
provide a Lock source for mixing – you cannot scale this input.
The YUV/YPbPr (component) input can also be switched to RGsB (sync on green)
mode if desired – see ‘Adjust sources’ for more information on manually selecting an
input type.
CV and YC inputs can accept either standard NTSC or PAL inputs – for example,
from a video camera, VCR, DVD player, gaming device, etc. PAL and NTSC
detection is automatic.
6.2 Computer outputs
The PC/HD and RGBHV outputs can use:
Analog RGBHV
RGsB (sync on green)
RGBS (separate sync at TTL levels)
YUV/YPbPr (including tri-level).
On Video Scalers, bypass mode (with the unit in Standby) will feed PC/HD in to
PC/HD out directly.
YUV/YPbPr (component) outputs can also be switched to RGsB (sync on green)
mode if desired - see ‘Adjust outputs’ for more information.