KLING & FREITAG K&F CA 1515-9 - SP - Manual (Page 4)

User's Manual ‘SP’ Models based upon the CA Series
KLING & FREITAG GMBH ©2003 - 2014 Version 7.1, 09.09.2014 Page 4 of 52
Contents
Chapter Page
1. General Safety Instructions 6
2. Introduction SP Loudspeakers 8
3. Connectors, Controls und Displays 10
4. Power Cord 13
5. Instructions for Suspending the Speakers 14
5.1 Using the ‘allsafe JUNGFALK’ Flying Points 15
6. Coverage Patterns of the SP Speakers 16
6.1 Changing the Coverage Pattern 16
7. Mounting Instructions for Speakers 17
7.1 Proper Arrangement of the Loudspeakers 17
7.2 Arrayed Speaker Systems (Cluster) 18
7.2.1 Horn not rotated 18
7.2.2 With rotated Horn 19
8. Wiring 20
8.1 Avoiding Ground Loops 20
8.1.1 What is a Ground Loop? 20
8.1.2 Avoiding Ground Loops 20
8.2 Connecting the Power Connectors to the Connecting Terminal 21
9. Configurations and Connecting Diagrams 21
9.1 Operating the Systems without K&F System Controller 21
9.1.1 Full-Range Mode 21
9.1.2 Full-Range Mode with Subwoofer 22
9.2 Operations with K&F System Controller 23
9.3 Maximum Configuration 23
10. Operating the Speakers 24
11. Touching Up Damage to Paint / Changing the Front Foam 24
12. Block Diagram of the SP Full-Range Speaker 25
13. Technical Specifications 26
13.1 CA 1001 - SP 26
13.2 CA 1201 - SP 27
13.3 CA 1215-6 - SP 28
13.4 CA 1215-9 - SP 29
13.5 CA 1515-6 - SP 30
13.6 CA 1515-9 - SP 31
14. Measuring Charts 32
14.1 CA 1001 - SP 32
14.2 CA 1201 - SP 34
14.3 CA 1215-6 - SP 36
14.4 CA 1215-9 - SP 38
14.5 CA 1515-6 - SP 40
14.6 CA 1515-9 - SP 42
15. Dimensions 44
15.1 CA 1001 - SP 44