KLING & FREITAG K&F Line 212-9 - SP User Manual

Page 9

User’s Manual

LINE 212-6 - SP / LINE 212-9 - SP

Version 5.0, 09.09.2014

Page 9 of 44

3. Connectors, Controls und Displays

1) LINE IN and LINE OUT (+6 dB)

Electronically balanced input and output connectors. Use the XLR female connector
(marked ‘IN’) as input. The parallel-wired XLR male connector (‘OUT’) is for connec-
tion to further ‘SP’ loudspeakers.

2) GROUND LIFT

When the ‘Ground Lift’ switch is set to LIFT, pin 1 of the LINE IN connector (ground)
is not connected to the chassis ground of the integrated amplifier module. The
ground connection between LINE IN (XLR male) and LINE OUT (XLR female) is main-
tained. The use of the ‘Ground Lift’ switch is sometimes necessary in dealing with
hum problems (see chapter 10.1 )

Never tape over the protective earth on the plug

Never tape over the protective earth on the plug ---

---

--- danger to life!

danger to life!

3) PROTECTIVE COVER

The protective cover prevents unwanted adjustment of the gain control and filter
ON / OFF switch. The cover has a snap-in lock. In order to reach the controls be-
neath, turn the cover sharply down in the direction of the arrow.

Warning

This manual is related to the following products:

K&F Line 212-6 - SP