Fuse in the nomos xlc, Replacing the fuses, Connection – KLING & FREITAG K&F NOMOS XLC User Manual
Page 12: Terminal assignment, Cabling a k&f system rack
User's manual
K&F NOMOS XLC
KLING & FREITAG GMBH © 2014
Version 4.2
Page 12 of 20
8.
Fuse in the NOMOS XLC
To increase the operating safety of the NOMOS XLC, the subwoofers are equipped with fuses
at the signal input. These fuses reduce the risk of consequential damage resulting from a
short circuit (i.e. charred cables / connectors / fire damage).
8.1
Replacing the Fuses
The fuse holder is behind the rear chassis.
Replace the fuse with the following original fuse only:
Bussmann S 506-8A, T 250V
9.
Connection
The operating safety and the highest-possible performance is only guaranteed in conjunction
with the K&F Topas or K&F SystemRack.
9.1
Terminal assignment
2-
2+
1-
1+
2-
2+
1-
1+
+
-
+
-
REAR SPEAKER
FRONT SPEAKERS
SPEAKON CONNECTORS
+
-