KLING & FREITAG K&F SONA 5 - Manual (Page 11)

User's manual K&F SONA 5
KLING & FREITAG GMBH © 2012 Revision 3.1 Page 11 of 20
Screw the retainer nut (A) onto thread reducer
(B) using a 19 mm jaw spanner. While doing this,
align the Mounting Arm.
Now align the loudspeaker arm as desired, and
then retighten the hexagon socket screws that
you previously loosened.
Tighten the screws enough so that the speaker
reliably keeps its position. Using excessive force
to tighten the screws can result in irreparable de-
struction of the threads!