Ivie iFlex 2400 Series - Manual (Page 6)

iFlex 2400
Technical Specifications
Inputs:
Up to 24 Analog: electronically balanced on
Phoenix/Combicon removable screw connectors
Mic Inputs: Nominal gain +20dB
Electronically switchable between
+20dB and +40dB
Input impedance 2kOhm
CMRR: >75dB at 1KHz
Equiv. Input Noise (EIN): <-125dBu typ with 150 Ohms source
Phantom power: 48V nominal, selectable per input
Line Inputs: Nominal gain -20dB,
Input impedance 20k Ohm
Max input level: +20dBu
Outputs:
Up to 24 Analog; electronically balanced on
Phoenix/Combicon removable screw connectors.
Maximum Output Level: +19dBu
Frequency Response: 20Hz to 20KHz (+/-1dBdB)
THD: <0.01% (20Hz to 20KHz, +10dBu
output)
Dynamic Range: 100dB typ. (22Hz to 22KHz unweighted)
Crosstalk: <-75dB
Control Ports:
12 inputs and outputs
Control Input Voltage: 0 to 10v
Control Input Impedance: 10kOhms
Logic Output: Open Collector, 100mA sink
Control Network:
Connectors: RJ45 Ethernet connector , USB 2.0
Panel LED Indicators: IO Card Type, Signal Present (per IO), Gate Status
Mainframe:
Connector: Standard IEC
Mains Voltage: 85-270V AC, 50/60Hz
Power Consumption: <75VA