ILUMINARC Ilumipod™ 7 IP - Manual (Page 4)

Ilumipod 7 IP Optic RGBW QRG
4
DMX Control
You will be able to control this product using a standard DMX controller.
The Ilumipod 7 IP Optic RGBW is set by default to the 7-channel ARC
FULL DMX personality and its DMX address is 001. The connections for
the DMX cables are indicated below.
To change the DMX personality, DMX address, or any other parameter of
the Ilumipod 7 IP Optic RGBW, you will need to use the optional Ilumicode
unit (see Settings on page 5).
DMX
Connection
You can connect the bare-ended IP67 rated signal cable from the fixture to
an IP67 junction box, as shown below.
Make sure to use IP67 rated conduit or direct buried cable (DBC) to link the
junction boxes.
DMX Junction Box
Wiring