ILUMINARC Ilumipanel™ 180 IP - Manual (Page 5)

Ilumipanel 180 IP Optic RGB QRG
5
DMX
Connection
This product provides a DMX 512 connection by using bare-ended,
IP67-rated signal cable. This cable comes connected to the product.
Signal Wiring To provide the signal, you have two options:
·
Connect the bare-ended, IP6- rated signal cable from the product
to two IP67-rated signal connectors (DMX In and DMX Out).
·
Use an IP67-rated junction box. If so, make sure to use
IP67-rated conduit.
The signal cable must match or exceed the electrical characteristics of
the Belden® 9841 cable for EIA RS-485 applications. You can also use
CAT 5, CAT 5e, or CAT 6.
DMX Junction Box
Wiring
DMX Cable Table Connection
DMX In DMX Out IP67 Pin
Ground Shield Shield 1
Data - Black Green 2
Data + White Red 3