Controllers, Dmx controller, Installation – ILUMINARC Ilumipanel™ 40 IP User Manual
Page 13
Installation
Ilumipanel 40 IP Optic RGB User Manual
9
If you have not
configured the
DMX starting
address and
DMX mode for each
product, they will all use
their default values. This
means that all products
will operate in unison.
Controllers
The Ilumipanel 40 IP Optic RGB can operate with a standard DMX controller or the
ILUMICODE ADDRESSER. The sections below provide information on how to connect these
products to the corresponding controllers. The instructions to operate these products with each of
the above controllers are in the
DMX Controller
The Ilumipanel 40 IP Optic RGB can work with a standard DMX controller. The
channel assignments will depend on the chosen personality (see the corresponding
section) and the DMX address assigned to each product (see the
section).
The figure below illustrates how to connect the DMX controller to the Ilumipanel 40 IP
Optic RGB.