ILUMINARC Ilumipanel™ 24g2 IP - Manual (Page 13)

Installation
Ilumipanel™ 24g2 IP User Manual Rev. 2 9
If you have not
configured the
DMX starting
address and
DMX mode for each
product, they will all use
their default values. This
means that all products
will operate in unison.
Controllers
The Ilumipanel™ 24g2 IP can operate with a standard DMX controller, the ILUMICON
controller, or the ILUMICODE addresser. The sections below provide information on how to
connect these products to the corresponding controllers. The instructions to operate these
products with each of the above controllers are in the
Operation section of this manual.
DMX Controller
The Ilumipanel™ 24g2 IP can work with a standard DMX controller. The channel assignments
will depend on the chosen personality (see the corresponding
Menu Map section) and the
DMX address assigned to each product (see the Programming section).
The figure below illustrates how to connect the DMX controller to the Ilumipanel™ 24g2 IP.