Hyundai H-CDM8063 - Manual (Page 13)

13
Menu Function
Press the control more than 2 seconds to enter menu mode, then each press changes the mode as follows:
TA mode MASK mode RETUNE mode DSP mode LOUD ON / OFF mode WOOF ON/OFF ESP mode MULT ON
/ OFF BEEP ON / OFF SEEK1/2 mode (only in tuner mode) ST / MO mode (only in FM mode) LOCAL / DX mode (only
in tuner mode).
TA mode
Rotate the Multi-Control to choose TA ALARM or TA SEEK mode, When TA is turned on and no traffic program identification code
has been received during the specified time, no TA/TP is displayed and either TA ALARM or TA SEEK is activated.
TA ALARM mode
Alarm is turned on.
TA SEEK mode
TA SEEK is activated.
MASK mode
Rotate the Multi-Control to choose MASK DPI or MASK ALL mode.
In some cases, the AF function may be influenced by some interference, example shared signals with strong field but without the RDS
data. For this reason, the unit has two options to avoid the above interference.
MASK DPI mode
Only the AF which has different program identification is masked.
MASK ALL mode
The AF which has different program identification and NO RDS signal with high field strength is masked.