Future Automation DA - Manual (Page 8)

In
st
al
la
ti
o
n
:
S
ta
ge
3
Page 7 of 12 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
DA - Double Arm Bracket
Adjusting the Uprights
The uprights are designed to have different size slots. 7mm
slots are for smaller bolts and 9mm slots are for larger bolts.
If the mounting points are recessed on the
back of the screen, it will be nessary to use
the spacers which have been provided.
It is recommended that a minimum of 15mm
Bolt thread screwed into the screen casing
without bottoming out. The spacer can also
be used if the back of the screen is not flat
or to help with electrical connection.
Recess
Spacer