Future Automation UBLS - Manual (Page 15)

In
st
all
at
io
n
: S
ta
ge
1
0
Page 14 of 24 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
UBLS - Under Bed Lift Swivel
Down Hinge Adjustment
To adjust the hinge DOWN position run the mechanism to the fully out position. Under the
carriage is the hinge DOWN position bracket which is secured in place with 2 nuts shown in
the detail view. Loosen these nuts and slide the bracket back and forth to alter the DOWN
hinge position. Run the mechanism IN to see how the adjustment has changed the hinge
DOWN angle.