Future Automation AL675 - Manual (Page 14)

In
st
al
la
ti
o
n
:
E
le
ct
ric
al
C
on
ne
ct
io
n
Page 13 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
AL675 UDC1 Actuator Lift
SLQV
Contact Closure
- Use an RJ45 connector in the
appropriate socket on the control
box to operate via contact closure
568A 568B
1 12V SUPPLY 12V SUPPLY - CURRENT LIMITED W/G W/O
2 12V LATCH
When 12V attached, device will go OUT.
When 12V removed device will go IN.
G O
3 GROUND GROUND W/O W/G
4 PIN 4 NOT USED BL BL
5 DEVICE LATCH
Momentary short to GROUND (pin 3), stops
device in current position.
W/BL W/BL LED 4
6 DEVICE STOP
Momentary short to GROUND (pin 3), stops
device in current position.
O G LED 3
7 DEVICE OUT
Momentary short to GROUND (pin 3), makes
device go OUT.
W/BR W/BR LED 2
8 DEVICE IN
Momentary short to GROUND (pin 3), makes
device go IN.
BR BR LED 1
PIN DESCRIPTION ACTION
WIRE / CABLE CONTACT CLOSURE
LED INDICATOR