Etymotic The BEAN® Quiet Sound Amplifier® - Manual (Page 9)

9
Insertion & Removal
Insertion
• Make sure the eartip is clean.
• Pull the ear up and out
while inserting.
• Twist and push gently until the
eartip seals in the ear canal.
• When using 3-flange eartips,
moistening may ease insertion.
• When using foam eartips: Roll
down or compress the foam
eartip before inserting. Hold
the eartip in place for about
5 seconds while foam expands
to create a tight seal in the
ear canal.
• When using glider eartips
no compression is needed;
simply push it into your ear.
Removal
• Remove with a slow
twisting motion.
• After removal, place the device in the protective case.