DynaScan Indoor 360 Degree LED Video Display DS1508 - Manual (Page 18)

18
Replacing/Cleaning Display Filters
All filters of the DynaScan display should be cleaned quarterly. Use normal tap water to clean the
filters. Do not use any sort of acidic cleaners or detergents. If a replacement filter is needed, please
contact your DynaScan dealer.
The following DS1508 360 Degree LED Display filters to be cleaned (or replaced) are located on the
top of the display.
1. User a small flat head screwdriver to pry
the filter covers off. Do not force the
cover off.
2. Remove old filter and replace with a new
clean filter.
3. Replace filter cover by gently pressing at the edges.