Dataman 530 Series - Manual (Page 15)

Development kit for DATAMAN 530
Programmer’s Guide
Return value: -
3.3.12. StartGeneratoion
Starts the generation of the one period in the single trigger mode. This function
has no effect in the period trigger mode.
void __declspec(dllimport) __stdcall StartGeneration();
Parameters: -
Return value: -
3.3.13. SetTriggerOnOff
Turns the triggering from external source on/off. This function works in the
single trigger mode only.
void __declspec(dllimport) __stdcall SetTriggerOnOff(int OnOff);
Parameters:
OnOff – indicates, whether the triggering from external source is turned on/off
ONOFF_ON – on
ONOFF_OFF – off
Return value: -
3.3.14. SetTriggerEdge
Sets the trigger sensitivity on the selected edge.
void __declspec(dllimport) __stdcall SetTriggerEdge(int edge);
Parameters:
edge – indicates edge
TRIGGER_EDGE_LEADING – leading edge
TRIGGER_EDGE_TRAILING – trailing edge
Return value: -
3.3.15. PrepareFrequency
Sets the second phase locked loop to the selected frequency. By presetting the
frequency you can achieve immediate tuning to this frequency after calling the
SetFrequency function.
double __declspec(dllimport) __stdcall PrepareFrequency(double freq);
- 15 -