Dixon 4000 Series - Manual (Page 29)

CARE AND MAINTENANCE
OIL FILL:
1. Push the valve body in and twist into the detent notch.
2. Clean any spilled oil from engine and chassis.
3. Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine
literature.
LUBRICATION:
CHASSIS:
LOCATIONS: SERVICE
INTERVALS:
RECOMMENDED GREASE:
Number of grease zerks used: [4]
[1] each front wheel caster and each front wheel hub.
Every 50 hours of operation
Name brand wheel bearing or multi-purpose grease
Lubricate each front wheel to allow even distribution of
grease within the wheel, rotate or spin each front wheel
after [3] pumps of the grease gun. Repeat process until the
appearance of grease is noted completely around each
caster axle.
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT
Page 28