Turning on the power – Dukane 28A8801A User Manual

Page 22

Make sure that the power cord is firmly and
correctly connected to the projector and outlet

Turn on the projector's power

Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the POWER indicator will light to
solid orange.

Press the STANDBY/ON button (control
panel or remote control)

• The projector begins warming up and the POWER

indicator blinks green.

• The POWER indicator stops blinking and

lights to solid green once the projector's
power is completely on.

Remove the lens cap

The picture is projected.

POWER-indikator

STANDBY/ON

LASER

BLANK

RGB

VIDEO

TURNING ON THE POWER

Control panel

Precautions

Connect all devices to be used to the projector prior to turning on the power.

WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.

Turn the

power on/off in
right order.

• Power on the

projector before the
computer or video
tape recorder.

• Power off the

projector after the
computer or video
tape recorder.

NOTE

på/av-bryter