Denon DVD-A1XV User Manual
Page 18
18
3rd
DVD-A1XV
AV amplifier with DENON LINK input terminals
To power outlet
High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold DENON LINK compatible
AV amplifier.
(8) DENON LINK connections
NOTES:
• When DENON LINK is set, the down-mixed audio signals are output only from
the left and right terminals and front left and front right terminals. If you want
to use the analog terminals, set to “DENON LINK” to “OFF”.
• The DVD-A1XV’s speaker settings are invalidated when the DENON LINK
connector is connected. (Make the speaker settings on the AV amplifier to
which the DVD-A1XV is connected.)
• When the DENON LINK 2nd connection, Super Audio CD’s signals are not
output from the DENON LINK connector. Please use the analog audio output
terminals or IEEE1394 connectors.
DENON LINK
2
Compatibility with previous equipment
• DENON LINK 3rd Edition uses a different signal format from DENON LINK Second (2nd) Edition.
Because of this, the DENON LINK 3rd Edition compatible digital audio signals output from the DVD player can only be played on AV
amplifiers that are DENON LINK 3rd Edition compatible.
(Playback using DENON LINK 3rd Edition compatible signals is not possible when using a DENON LINK 3rd Edition compatible DVD
player together with an AV amplifier that is not DENON LINK 3rd Edition compatible.)
NOTES:
• Note that the sound may not be output or noise may be generated when two devices compatible with different DENON LINK
versions are connected. To avoid this, please pay attention to the points below when making the settings.
• When using the DENON LINK connectors, be sure to check the DENON LINK version of your AV amplifier then make the DENON
LINK output settings on the DVD-A1XV accordingly.
q If the DENON LINK version of your AV amplifier is 2nd Edition (if “S.E.” is indicated next to the connector), the DVD-A1XV can
only be used with its DENON LINK output set to “2nd”.
w If the DENON LINK version of your AV amplifier is 3rd Edition (if “3rd” is indicated next to the connector), the DVD-A1XV can be
used with its DENON LINK output set to either “2nd” or “3rd”.
DENON LINK “2nd (AUTO)”, “2nd (1394)” and “2nd (ANALOG)” settings:
DVD Video, DVD Audio, CDDA and Video CD audio signals can be transferred.
DENON LINK “3rd” setting:
Super Audio CD, DVD Video, DVD Audio, CDDA and Video CD audio signals can be transferred.