beautypg.com

Y7p/y10p loudspeaker, Product description – d&b Y7P User Manual

Page 5

background image

2.1. Product description

Y7P/Y10P are passive 2-way loudspeakers housing two 8" LF

drivers and a 1.4" HF compression driver with a rotatable CD horn

producing a nominal dispersion (h x v) of 75° x 40° or 110° x

40°, respectively. The frequency response extends from 59 Hz to

above 18 kHz.

The two 8" neodymium LF drivers are positioned in a dipolar

arrangement providing exceptional vertical dispersion control even

at lower frequencies.

Specially designed ports with optimized flow characteristics

provide a considerably improved, efficient low frequency

reproduction.

The cabinets are constructed from marine plywood and have an

impact and weather protected PCP (Polyurea Cabinet Protection)

finish. The top and bottom panels incorporate a handle each. The

front of the loudspeaker cabinet is protected by a rigid metal grill

backed by an acoustically transparent foam.

The cabinets accommodate fittings for three types of rigging

devices:

A quick lock adapter plate on one side of the cabinet that

accepts the Z5397 YP Swivel bracket.

Two M10 threaded inserts on the top and bottom panels each

to accept the Z5399 YP Mounting bracket.

Two additional combined sockets

[A], one in the top panel

and one at the center rear of the cabinet that accept either:

– the Q9032 Safety eye bolt M10 to apply a secondary

safety device.

– the Z5049 Flying pin 8 mm to support single cabinets or to

secure the aiming of an array.

Intended use of the Z5049 Flying pin

WARNING!
Potential risk of personal injury and/or

damage to material!

The Z5049 Flying pin 8 mm is designed and intended for static

loads only. Therefore please observe the following:

The Flying pin must not be used to attach a secondary safety

device.

Ensure the Flying pin is securely locked before lifting any load.

Proceed as follows:

1. Press the button to

release the locking mechanism ([r]

).

2. Fully insert the Flying pin into the respective socket.
3. Release the button to

lock the pin ([l]

).

4. Recheck the Flying pin is securely locked by briefly pulling the

Flying pin towards you.

Additional combined sockets

2. Y7P/Y10P loudspeaker

d&b Y7P/Y10P Manual 1.2 en

5

This manual is related to the following products: