d&b 4S - Manual (Page 9)

5S system data
Frequency response (–5 dB standard mode) 80 Hz - 20 kHz
Frequency response (–5 dB CUT mode) 130 Hz - 20 kHz
Max. sound pressure (1 m, free field) with D6 117 dB
Max. sound pressure (1 m, free field) with D12 118 dB
(SPLmax peak, pink noise test signal with crest factor of 4)
Input level (100 dB-SPL/1 m) –6 dBu
5S loudspeaker
Nominal impedance 16 ohms
Power handling capacity (RMS/peak 10 ms) 60/400 W
Nominal dispersion angle (hor. x vert.) 100° conical
Components 5“ driver with ferrite magnet
1” dome tweeter, coaxially mounted
Passive crossover network
Connections 2 x NL4
1 x screw terminal block (ST - up to 4 mm 2 /AWG 11)
Pin assignments NL4: 1+/1–
Weight 2.5 kg (5.5 lb)
Fig. 14: 5S frequency response, standard and CUT modes
Fig. 15: 5S cabinet dimensions in mm [inch]
d&b 4S/5S Manual (1.2 EN) 9